Open Type Thin Section Four Point Contact Ball Bearings (Type X)

Introduction

Open Type Thin Section Four Point Contact Ball Bearings (Type X) are also known as equal section thin section four point contact ball bearings because, unlike ordinary rolling bearings, the cross-section of thin section four point contact ball bearings of this series remains constant regardless of the size of the bearing bore.

The difference between thin section four point contact ball bearings (Type X) and thin section angular contact ball bearings (Type A) and thin section Radial Contact Ball Bearings (Type C) lies in the shape of their raceways. thin section four point contact ball bearings have two radius centers on each side of the raceway, both of which are offset from the centerline of the balls. Point Contact Ball Bearings have two radius centers on each side of the raceway, both of which are offset from the centerline of the ball. This structure makes Thin Section Four Point Contact Ball Bearings form four points of contact between the steel ball and the raceway.

Open Type Thin Section Four Point Contact Ball Bearings (Type X) increase friction resistance, improve running accuracy, and solve the size and weight problems of conventional bearings, as well as shaft and housing size and weight problems, Four Point Contact Ball Bearings are unique in that they can support radial and oil-white loads in both directions. The unique feature of four-point contact ball bearings is that they can support radial and axial loads in both directions, and their extremely thin cross-loading surfaces enable them to provide great size and weight savings for light to medium-sized applications with slow or intermittent rotations. Because a four-point contact ball bearing can usually replace two bearings, the design is much more streamlined, and the four-point contact ball bearings can be supplied with different internal preloads and clearances according to the customer’s requirements, and this can be achieved through the use of ball bearings with a larger clearance than that between the raceways of the inner and outer rings. Of course, even in the absence of external loads, the balls and raceways will deform elastically.

Bearing material: Gcr15 and SAE 440C, 9cr18 and so on.
Rolling body: ceramic ball, steel ball, etc.

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Are Classified As Follows

KAA type cross-section size 4.763mm, ball size 2.381mm, OD size 34.925mm-53.975mm
KA type cross-section size 6.35mm, ball size 3.175mm, OD size 63.5mm-317.5mm
KB type cross-section size 7.938mm, ball size 3.969mm, OD size 66.675mm-523.875mm
KC type cross-section size 9.525mm, ball size 4.762mm, OD size 120.65mm-654.05mm
KD type cross-section size 12.7mm, ball size 6.35mm, OD size 127mm-660.4mm
KF type cross-section size 19.05mm, ball size 9.525mm, OD size 139.7mm-800.1mm
KG type cross-section size 25.4mm, steel ball size 12.7mm, OD size 152.4mm-1066.8mm

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Key Features

1. Four Point Contact Design:

The distinctive four-point contact design allows Type X bearings to support axial and radial loads simultaneously, providing increased rigidity and versatility in application.

2. Axial and Radial Load Capacity:

Type X bearings excel in applications where both axial and radial loads are present. This capability makes them suitable for scenarios requiring enhanced load-carrying capacity.

3. Space-Saving Design:

Similar to other thin section bearings, Type X bearings feature a slim profile, making them ideal for applications with limited space while maintaining high load-bearing capacity.

4. Precision Performance:

Manufactured to stringent tolerances, Type X bearings ensure precision and accuracy in operation. This makes them suitable for applications demanding high levels of control and performance.

5. Versatility in Applications:

Type X bearings find applications in various industries, including robotics, machine tools, and medical devices, where their ability to handle combined loads is particularly advantageous.

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Applications

1. Robotics:

Type X bearings are well-suited for robotic applications due to their ability to handle both radial and axial loads, contributing to the efficiency and precision of robotic movements.

2. Material Handling Equipment:

In machine tool applications, where precision is critical, Type X bearings provide the necessary rigidity and load support for smooth and accurate machining operations.

3. Medical Devices:

The combination of a slim design and the ability to handle complex loads makes Type X bearings suitable for various medical devices, contributing to their precision and reliability.

4. Material Handling Equipment:

Type X bearings find application in material handling equipment where their ability to handle both radial and axial loads is essential for efficient and reliable performance.

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Product Model

LKPB Number	Boundary dimensions (inch/mm)					Basic Cap.N				Weight	Interchange
	Boundary dimensions (inch/mm)					Radial		Axial		Weight	Interchange
	d	D	H	L1	L2	Cor	Cr	Coa	Ca	Kg	NTN	KAYDON	SILVERTHIN
KAA10XL0	1	1.375	0.1875	1.142	1.236	1290	1100	3250	1650	0.012	KXS010	KAA10XL0	SAA10XL0
KAA10XL0	25.4	34.925	4.763	29	31.4	1290	1100	3250	1650	0.012	KXS010	KAA10XL0	SAA10XL0
KAA15XL0	1.5	1.875	0.1875	1.642	1.736	1780	1320	4450	2050	0.018	KXS015	KAA15XL0	SAA15XL0
KAA15XL0	38.1	47.625	4.763	41.7	44.1	1780	1320	4450	2050	0.018	KXS015	KAA15XL0	SAA15XL0
KAA17XL0	1.75	2.125	0.1875	1.89	1.985	2044	1418	5067	2222	0.045	KXS017	KAA17XL0	SAA17XL0
KAA17XL0	44.45	53.975	4.763	48.006	50.149	2044	1418	5067	2222	0.045	KXS017	KAA17XL0	SAA17XL0
KA020XP0	2	2.5	0.25	2.816	2.314	3020	2285	7600	3510	0.048	KXA020	KA020XP0	SA020XP0
KA020XP0	50.8	63.5	6.35	55.5	58.8	3020	2285	7600	3510	0.048	KXA020	KA020XP0	SA020XP0
KA025XP0	2.5	3	0.25	2.686	2.814	3690	2590	9290	4050	0.059	KXA025	KA025XP0	SA025XP0
KA025XP0	63.5	76.2	6.35	68.2	71.5	3690	2590	9290	4050	0.059	KXA025	KA025XP0	SA025XP0
KA030XP0	3	3.5	0.25	3.186	3.314	4400	2860	10980	4490	0.068	KXA030	KA030XP0	SA030XP0
KA030XP0	76.2	88.9	6.35	80.9	84.2	4400	2860	10980	4490	0.068	KXA030	KA030XP0	SA030XP0
KA035XP0	3.5	4	0.25	3.686	3.814	5070	3120	12670	4930	0.082	KXA035	KA035XP0	SA035XP0
KA035XP0	88.9	101.6	6.35	93.6	96.9	5070	3120	12670	4930	0.082	KXA035	KA035XP0	SA035XP0
KA040XP0	4	4.5	0.25	4.186	4.314	5730	3360	14310	5380	0.09	KXA040	KA040XP0	SA040XP0
KA040XP0	101.6	114.3	6.35	106.3	109.6	5730	3360	14310	5380	0.09	KXA040	KA040XP0	SA040XP0
KA042XP0	4.25	4.75	0.25	4.436	4.564	6090	3480	15160	5600	0.095	KXA042	KA042XP0	SA042XP0
KA042XP0	107.95	120.65	6.35	112.7	115.9	6090	3480	15160	5600	0.095	KXA042	KA042XP0	SA042XP0
KA045XP0	4.5	5	0.25	4.686	4.814	6400	3600	16000	5820	0.1	KXA045	KA045XP0	SA045XP0
KA045XP0	114.3	127	6.35	119	122.3	6400	3600	16000	5820	0.1	KXA045	KA045XP0	SA045XP0
KA047XP0	4.75	5.25	0.25	4.936	5.064	6760	3710	16850	6000	0.104	KXA047	KA047XP0	SA047XP0
KA047XP0	120.65	133.35	6.35	125.4	128.6	6760	3710	16850	6000	0.104	KXA047	KA047XP0	SA047XP0
KA050XP0	5	5.5	0.25	5.186	5.314	7070	3820	17690	6220	0.109	KXA050	KA050XP0	SA050XP0
KA050XP0	127	139.7	6.35	131.7	135	7070	3820	17690	6220	0.109	KXA050	KA050XP0	SA050XP0
KA055XP0	5.5	6	0.25	5.686	5.814	7770	4030	19380	6570	0.113	KXA055	KA055XP0	SA055XP0
KA055XP0	139.7	152.4	6.35	144.4244	147.6756	7770	4030	19380	6570	0.113	KXA055	KA055XP0	SA055XP0
KA060XP0	6	6.5	0.25	6.186	6.314	8440	4240	21070	6970	0.127	KXA060	KA060XP0	SA060XP0
KA060XP0	152.4	165.1	6.35	157.1244	160.3756	8440	4240	21070	6970	0.127	KXA060	KA060XP0	SA060XP0
KA065XP0	6.5	7	0.25	6.686	6.814	9110	4450	22760	7330	0.136	KXA065	KA065XP0	SA065XP0
KA065XP0	165.1	177.8	6.35	169.8244	173.0756	9110	4450	22760	7330	0.136	KXA065	KA065XP0	SA065XP0
KA070XP0	7	7.5	0.25	7.186	7.314	9780	4650	24440	7690	0.141	KXA070	KA070XP0	SA070XP0
KA070XP0	177.8	190.5	6.35	182.5244	185.7756	9780	4650	24440	7690	0.141	KXA070	KA070XP0	SA070XP0
KA075XP0	7.5	8	0.25	7.686	7.814	10440	4840	26130	8040	0.154	KXA075	KA075XP0	SA075XP0
KA075XP0	190.5	203.2	6.35	195.2244	198.4756	10440	4840	26130	8040	0.154	KXA075	KA075XP0	SA075XP0
KA080XP0	8	8.5	0.25	8.186	8.314	11110	5020	27820	8400	0.172	KXA080	KA080XP0	SA080XP0
KA080XP0	203.2	215.9	6.35	207.9244	211.1756	11110	5020	27820	8400	0.172	KXA080	KA080XP0	SA080XP0
KA090XP0	9	9.5	0.25	9.186	9.314	12490	5380	31200	9060	0.2	KXA090	KA090XP0	SA090XP0
KA090XP0	228.6	241.3	6.35	233.3244	236.5756	12490	5380	31200	9060	0.2	KXA090	KA090XP0	SA090XP0
KA100XP0	10	10.5	0.25	10.186	10.314	13820	5730	34580	9690	0.227	KXA100	KA100XP0	SA100XP0
KA100XP0	254	266.7	6.35	258.7244	261.9756	13820	5730	34580	9690	0.227	KXA100	KA100XP0	SA100XP0
KA110XP0	11	11.5	0.25	11.186	11.314	15150	6050	37960	10310	0.236	KXA110	KA110XP0	SA110XP0
KA110XP0	279.4	292.1	6.35	284.1244	287.3756	15150	6050	37960	10310	0.236	KXA110	KA110XP0	SA110XP0
KA120XP0	12	12.5	0.25	12.186	12.314	16530	6370	41340	10890	0.254	KXA120	KA120XP0	SA120XP0
KA120XP0	304.8	317.5	6.35	309.5244	312.7756	16530	6370	41340	10890	0.254	KXA120	KA120XP0	SA120XP0
KB020XP0	2	2.625	0.3125	2.231	2.393	4130	3370	10400	5020	0.073	KXB020	KB020XP0	SB020XP0
KB020XP0	50.8	66.675	7.9375	56.7	60.8	4130	3370	10400	5020	0.073	KXB020	KB020XP0	SB020XP0
KB025XP0	2.5	3.125	0.3125	2.731	2.893	5070	3770	12620	5730	0.091	KXB025	KB025XP0	SB025XP0
KB025XP0	63.5	79.375	7.9375	69.4	73.5	5070	3770	12620	5730	0.091	KXB025	KB025XP0	SB025XP0
KB030XP0	3	3.625	0.3125	3.231	3.393	5960	4150	14890	6400	0.109	KXB030	KB030XP0	SB030XP0
KB030XP0	76.2	92.075	7.9375	82.1	86.2	5960	4150	14890	6400	0.109	KXB030	KB030XP0	SB030XP0
KB035XP0	3.5	4.125	0.3125	3.731	3.893	6850	4510	17160	7070	0.125	KXB035	KB035XP0	SB035XP0
KB035XP0	88.9	104.775	7.9375	94.8	98.9	6850	4510	17160	7070	0.125	KXB035	KB035XP0	SB035XP0
KB040XP0	4	4.625	0.3125	4.432	4.393	7780	4850	19430	7650	0.14	KXB040	KB040XP0	SB040XP0
KB040XP0	101.6	117.475	7.9375	107.5	111.6	7780	4850	19430	7650	0.14	KXB040	KB040XP0	SB040XP0
KB042XP0	4.25	4.875	0.3175	4.481	4.643	8130	4980	20310	7910	0.147	KXB042	KB042XP0	SB042XP0
KB042XP0	107.95	123.825	7.9375	113.8	117.9	8130	4980	20310	7910	0.147	KXB042	KB042XP0	SB042XP0
KB045XP0	4.5	5.125	0.3125	4.731	4.893	8670	5180	21690	8220	0.16	KXB045	KB045XP0	SB045XP0
KB045XP0	114.3	130.175	7.9375	120.2	124.3	8670	5180	21690	8220	0.16	KXB045	KB045XP0	SB045XP0
KB047XP0	4.75	5.375	0.3125	4.981	5.143	9020	5300	22580	8450	0.163	KXB047	KB047XP0	SB047XP0
KB047XP0	120.65	136.525	7.9375	126.6	130.6	9020	5300	22580	8450	0.163	KXB047	KB047XP0	SB047XP0
KB050XP0	5	5.625	0.3125	5.231	5.393	9560	5490	23910	8800	0.172	KXB050	KB050XP0	SB050XP0
KB050XP0	127	142.875	7.9375	132.9	137	9560	5490	23910	8800	0.172	KXB050	KB050XP0	SB050XP0
KB055XP0	5.5	6.125	0.3125	5.731	5.893	10490	5800	26180	9340	0.186	KXB055	KB055XP0	SB055XP0
KB055XP0	139.7	155.575	7.9375	145.6	149.7	10490	5800	26180	9340	0.186	KXB055	KB055XP0	SB055XP0
KB060XP0	6	6.625	0.3125	6.231	6.393	11380	6100	28450	9870	0.205	KXB060	KB060XP0	SB060XP0
KB060XP0	152.4	168.275	7.9375	158.3	162.4	11380	6100	28450	9870	0.205	KXB060	KB060XP0	SB060XP0
KB065XP0	6.5	7.125	0.3125	6.731	6.893	12270	6380	30720	10400	0.216	KXB065	KB065XP0	SB065XP0
KB065XP0	165.1	180.975	7.9375	171	175.1	12270	6380	30720	10400	0.216	KXB065	KB065XP0	SB065XP0
KB070XP0	7	7.625	0.3125	7.231	7.393	13200	6660	32980	10890	0.232	KXB070	KB070XP0	SB070XP0
KB070XP0	177.8	193.675	7.9375	183.7	187.8	13200	6660	32980	10890	0.232	KXB070	KB070XP0	SB070XP0
KB075XP0	7.5	8.125	0.3125	7.731	7.893	14090	6930	35200	11380	0.25	KXB075	KB075XP0	SB075XP0
KB075XP0	190.5	206.375	7.9375	196.4	200.5	14090	6930	35200	11380	0.25	KXB075	KB075XP0	SB075XP0
KB080XP0	8	8.625	0.3125	8.231	8.393	14980	7190	37470	11870	0.262	KXB080	KB080XP0	SB080XP0
KB080XP0	203.2	219.075	7.9375	209.1	213.2	14980	7190	37470	11870	0.262	KXB080	KB080XP0	SB080XP0
KB090XP0	9	9.625	0.3125	9.231	9.393	16800	7700	42000	12800	0.3	KXB090	KB090XP0	SB090XP0
KB090XP0	228.6	244.475	7.9375	234.5	238.6	16800	7700	42000	12800	0.3	KXB090	KB090XP0	SB090XP0
KB100XP0	10	10.625	0.3125	10.231	10.393	18620	8180	46500	13690	0.331	KXB100	KB100XP0	SB100XP0
KB100XP0	254	269.875	7.9375	259.9	264	18620	8180	46500	13690	0.331	KXB100	KB100XP0	SB100XP0
KB110XP0	11	11.625	0.3125	11.231	11.393	20400	8650	51030	14580	0.36	KXB110	KB110XP0	SB110XP0
KB110XP0	279.4	295.275	7.9375	285.3	289.4	20400	8650	51030	14580	0.36	KXB110	KB110XP0	SB110XP0
KB120XP0	12	12.625	0.3125	12.231	12.393	22230	9090	55560	15420	0.39	KXB120	KB120XP0	SB120XP0
KB120XP0	304.8	320.675	7.9375	310.7	314.8	22230	9090	55560	15420	0.39	KXB120	KB120XP0	SB120XP0
KB140XP0	14	14.625	0.3125	14.231	14.393	25830	9930	64590	17070	0.476	KXB140	KB140XP0	SB140XP0
KB140XP0	355.6	371.475	7.9375	361.5	365.6	25830	9930	64590	17070	0.476	KXB140	KB140XP0	SB140XP0
KB160XP0	16	16.625	0.3125	16.231	16.393	29430	10710	73610	18630	0.544	KXB160	KB160XP0	SB160XP0
KB160XP0	406.4	422.275	7.9375	412.3	416.4	29430	10710	73610	18630	0.544	KXB160	KB160XP0	SB160XP0
KB180XP0	18	18.625	0.3125	18.231	18.393	33070	11450	82630	20090	0.612	KXB180	KB180XP0	SB180XP0
KB180XP0	457.2	473.075	7.9375	463.1	467.2	33070	11450	82630	20090	0.612	KXB180	KB180XP0	SB180XP0
KB200XP0	20	20.625	0.3125	20.231	20.393	36670	12140	91660	21560	0.68	KXB200	KB200XP0	SB200XP0
KB200XP0	508	523.875	7.9375	513.9	518	36670	12140	91660	21560	0.68	KXB200	KB200XP0	SB200XP0
KC040XP0	4	4.75	0.375	4.432	4.393	9340	6300	23380	9820	0.204	KXC040	KC040XP0	SC040XP0
KC040XP0	101.6	120.65	9.525	107.5	111.6	9340	6300	23380	9820	0.204	KXC040	KC040XP0	SC040XP0
KC042XP0	4.25	5	0.375	4.481	4.643	9870	6500	24710	10180	0.213	KXC042	KC042XP0	SC042XP0
KC042XP0	107.95	127	9.525	113.8	117.9	9870	6500	24710	10180	0.213	KXC042	KC042XP0	SC042XP0
KC045XP0	4.5	5.25	0.375	4.731	4.893	10400	6710	26050	10580	0.225	KXC045	KC045XP0	SC045XP0
KC045XP0	114.3	133.35	9.525	120.2	124.3	10400	6710	26050	10580	0.225	KXC045	KC045XP0	SC045XP0
KC047XP0	4.75	5.5	0.375	4.981	5.143	10940	6920	27380	10940	0.235	KXC047	KC047XP0	SC047XP0
KC047XP0	120.65	139.7	9.525	126.6	130.6	10940	6920	27380	10940	0.235	KXC047	KC047XP0	SC047XP0
KC050XP0	5	5.75	0.375	5.231	5.393	11510	7110	28720	11290	0.263	KXC050	KC050XP0	SC050XP0
KC050XP0	127	146.05	9.525	132.9	137	11510	7110	28720	11290	0.263	KXC050	KC050XP0	SC050XP0
KC055XP0	5.5	6.25	0.375	5.731	5.893	12580	7500	31380	11960	0.268	KXC055	KC055XP0	SC055XP0
KC055XP0	139.7	158.75	9.525	145.6	149.7	12580	7500	31380	11960	0.268	KXC055	KC055XP0	SC055XP0
KC060XP0	6	6.75	0.375	6.231	6.393	13650	7870	34050	12620	0.295	KXC060	KC060XP0	SC060XP0
KC060XP0	152.4	171.45	9.525	158.3	162.4	13650	7870	34050	12620	0.295	KXC060	KC060XP0	SC060XP0
KC065XP0	6.5	7.25	0.375	6.731	6.893	14710	8230	36760	13290	0.312	KXC065	KC065XP0	SC065XP0
KC065XP0	165.1	184.15	9.525	171	175.1	14710	8230	36760	13290	0.312	KXC065	KC065XP0	SC065XP0
KC070XP0	7	7.75	0.375	7.231	7.393	15780	8580	39430	13910	0.34	KXC070	KC070XP0	SC070XP0
KC070XP0	177.8	196.85	9.525	183.7	187.8	15780	8580	39430	13910	0.34	KXC070	KC070XP0	SC070XP0
KC075XP0	7.5	8.25	0.375	7.731	7.893	16850	8920	42090	14540	0.36	KXC075	KC075XP0	SC075XP0
KC075XP0	190.5	209.55	9.525	196.4	200.5	16850	8920	42090	14540	0.36	KXC075	KC075XP0	SC075XP0
KC080XP0	8	8.75	0.375	8.231	8.393	17910	9250	44760	15160	0.387	KXC080	KC080XP0	SC080XP0
KC080XP0	203.2	222.25	9.525	209.1	213.2	17910	9250	44760	15160	0.387	KXC080	KC080XP0	SC080XP0
KC090XP0	9	9.75	0.375	9.231	9.393	20050	9890	50100	16310	0.45	KXC090	KC090XP0	SC090XP0
KC090XP0	228.6	247.65	9.525	234.5	238.6	20050	9890	50100	16310	0.45	KXC090	KC090XP0	SC090XP0
KC100XP0	10	10.75	0.375	10.231	10.393	22180	10500	55430	17470	0.481	KXC100	KC100XP0	SC100XP0
KC100XP0	254	273.05	9.525	259.9	264	22180	10500	55430	17470	0.481	KXC100	KC100XP0	SC100XP0
KC110XP0	11	11.75	0.375	11.231	11.393	24310	11090	60810	18580	0.526	KXC110	KC110XP0	SC110XP0
KC110XP0	279.4	298.45	9.525	285.3	289.4	24310	11090	60810	18580	0.526	KXC110	KC110XP0	SC110XP0
KC120XP0	12	12.75	0.375	12.231	12.393	26450	11650	66140	19650	0.567	KXC120	KC120XP0	SC120XP0
KC120XP0	304.8	323.85	9.525	310.7	314.8	26450	11650	66140	19650	0.567	KXC120	KC120XP0	SC120XP0
KC140XP0	14	14.75	0.375	14.231	14.393	30720	12720	76810	21740	0.689	KXC140	KC140XP0	SC140XP0
KC140XP0	355.6	374.65	9.525	361.5	365.6	30720	12720	76810	21740	0.689	KXC140	KC140XP0	SC140XP0
KC160XP0	16	16.75	0.375	16.231	16.393	35030	13720	87520	23690	0.785	KXC160	KC160XP0	SC160XP0
KC160XP0	406.4	425.45	9.525	412.3	416.4	35030	13720	87520	23690	0.785	KXC160	KC160XP0	SC160XP0
KC180XP0	18	18.75	0.375	18.231	18.393	39290	14650	98190	25600	0.88	KXC180	KC180XP0	SC180XP0
KC180XP0	457.2	476.25	9.525	463.1	467.2	39290	14650	98190	25600	0.88	KXC180	KC180XP0	SC180XP0
KC200XP0	20	20.75	0.375	20.231	20.393	43560	15520	108900	27430	0.98	KXC200	KC200XP0	SC200XP0
KC200XP0	508	527.05	9.525	513.9	518	43560	15520	108900	27430	0.98	KXC200	KC200XP0	SC200XP0
KC250XP0	25	25.75	0.375	25.277	25.473	54230	17510	135620	31730	1.22	KXC250	KC250XP0	SC250XP0
KC250XP0	635	654.05	9.525	642.0358	647.0142	54230	17510	135620	31730	1.22	KXC250	KC250XP0	SC250XP0
KC300XP0	30	30.75	0.375	30.277	30.473	64940	19280	162340	35780	1.46	KXC300	KC300XP0	SC300XP0
KC300XP0	762	781.05	9.525	769.0358	774.0142	64940	19280	162340	35780	1.46	KXC300	KC300XP0	SC300XP0
KD040XP0	4	5	0.5	4.37	4.63	13690	10270	34230	15650	0.366	KXD040	KD040XP0	SD040XP0
KD040XP0	101.6	127	12.7	111	117.6	13690	10270	34230	15650	0.366	KXD040	KD040XP0	SD040XP0
KD042XP0	4.25	5.25	0.5	4.62	4.88	14180	10470	35470	16000	0.386	KXD042	KD042XP0	SD042XP0
KD042XP0	107.95	133.35	12.7	117.3	124	14180	10470	35470	16000	0.386	KXD042	KD042XP0	SD042XP0
KD045XP0	4.5	5.5	0.5	4.87	5.13	15200	10900	38010	16760	0.405	KXD045	KD045XP0	SD045XP0
KD045XP0	114.3	139.7	12.7	123.7	130.3	15200	10900	38010	16760	0.405	KXD045	KD045XP0	SD045XP0
KD047XP0	4.75	5.75	0.5	5.12	5.38	15690	11090	39290	17160	0.426	KXD047	KD047XP0	SD047XP0
KD047XP0	120.65	146.05	12.7	130	136.7	15690	11090	39290	17160	0.426	KXD047	KD047XP0	SD047XP0
KD050XP0	5	6	0.5	5.37	5.63	16710	11520	41830	17870	0.454	KXD050	KD050XP0	SD050XP0
KD050XP0	127	152.4	12.7	136.4	143	16710	11520	41830	17870	0.454	KXD050	KD050XP0	SD050XP0
KD055XP0	5.5	6.5	0.5	5.87	6.13	18230	12110	45610	18940	0.485	KXD055	KD055XP0	SD055XP0
KD055XP0	139.7	165.1	12.7	149.1	155.7	18230	12110	45610	18940	0.485	KXD055	KD055XP0	SD055XP0
KD060XP0	6	7	0.5	6.37	6.63	19780	12690	49430	19960	0.526	KXD060	KD060XP0	SD060XP0
KD060XP0	152.4	177.8	12.7	161.8	168.4	19780	12690	49430	19960	0.526	KXD060	KD060XP0	SD060XP0
KD065XP0	6.5	7.5	0.5	6.87	7.13	21290	13250	53210	20980	0.566	KXD065	KD065XP0	SD065XP0
KD065XP0	165.1	190.5	12.7	174.5	181.1	21290	13250	53210	20980	0.566	KXD065	KD065XP0	SD065XP0
KD070XP0	7	8	0.5	7.37	7.63	22800	13790	57020	21960	0.606	KXD070	KD070XP0	SD070XP0
KD070XP0	177.8	203.2	12.7	187.2	193.8	22800	13790	57020	21960	0.606	KXD070	KD070XP0	SD070XP0
KD075XP0	7.5	8.5	0.5	7.87	8.13	24310	14320	60810	22940	0.65	KXD075	KD075XP0	SD075XP0
KD075XP0	190.5	215.9	12.7	199.9	206.5	24310	14320	60810	22940	0.65	KXD075	KD075XP0	SD075XP0
KD080XP0	8	9	0.5	8.37	8.63	25830	14830	64630	23870	0.694	KXD080	KD080XP0	SD080XP0
KD080XP0	203.2	228.6	12.7	212.6	219.2	25830	14830	64630	23870	0.694	KXD080	KD080XP0	SD080XP0
KD090XP0	9	10	0.5	9.37	9.63	28890	15830	72230	25740	0.78	KXD090	KD090XP0	SD090XP0
KD090XP0	228.6	254	12.7	238	244.6	28890	15830	72230	25740	0.78	KXD090	KD090XP0	SD090XP0
KD100XP0	10	11	0.5	10.37	10.63	31920	16780	79830	27520	0.853	KXD100	KD100XP0	SD100XP0
KD100XP0	254	279.4	12.7	263.4	270	31920	16780	79830	27520	0.853	KXD100	KD100XP0	SD100XP0
KD110XP0	11	12	0.5	11.37	11.63	34980	17690	87430	29200	0.934	KXD110	KD110XP0	SD110XP0
KD110XP0	279.4	304.8	12.7	288.8	295.4	34980	17690	87430	29200	0.934	KXD110	KD110XP0	SD110XP0
KD120XP0	12	13	0.5	12.37	12.63	38010	18570	95030	30890	1.02	KXD120	KD120XP0	SD120XP0
KD120XP0	304.8	330.2	12.7	314.2	320.8	38010	18570	95030	30890	1.02	KXD120	KD120XP0	SD120XP0
KD140XP0	14	15	0.5	14.37	14.63	44090	20230	110240	34090	1.24	KXD140	KD140XP0	SD140XP0
KD140XP0	355.6	381	12.7	365	371.6	44090	20230	110240	34090	1.24	KXD140	KD140XP0	SD140XP0
KD160XP0	16	17	0.5	16.37	16.63	50180	21770	125440	37160	1.41	KXD160	KD160XP0	SD160XP0
KD160XP0	406.4	431.8	12.7	415.8	422.4	50180	21770	125440	37160	1.41	KXD160	KD160XP0	SD160XP0
KD180XP0	18	19	0.5	18.37	18.63	56230	23230	140640	40140	1.58	KXD180	KD180XP0	SD180XP0
KD180XP0	457.2	482.6	12.7	466.6	473.2	56230	23230	140640	40140	1.58	KXD180	KD180XP0	SD180XP0
KD200XP0	20	21	0.5	20.37	20.63	62320	24600	155840	42980	1.75	KXD200	KD200XP0	SD200XP0
KD200XP0	508	533.4	12.7	517.4	524	62320	24600	155840	42980	1.75	KXD200	KD200XP0	SD200XP0
KD210XP0	21	22	0.5	21.37	21.63	65390	25250	163450	44360	1.83	KXD210	KD210XP0	SD210XP0
KD210XP0	533.4	558.8	12.7	542.798	549.402	65390	25250	163450	44360	1.83	KXD210	KD210XP0	SD210XP0
KD250XP0	25	26	0.5	25.37	25.63	77520	27710	193850	49690	2.17	KXD250	KD250XP0	SD250XP0
KD250XP0	635	660.4	12.7	644.398	651.002	77520	27710	193850	49690	2.17	KXD250	KD250XP0	SD250XP0
KD300XP0	30	31	0.5	30.37	30.63	92720	30470	231860	56010	2.6	KXD300	KD300XP0	SD300XP0
KD300XP0	762	787.4	12.7	771.398	778.002	92720	30470	231860	56010	2.6	KXD300	KD300XP0	SD300XP0
KF040XP0	4	5.5	0.75	4.555	4.945	23830	20730	59560	30360	0.875	KXF040	KF040XP0	SF040XP0
KF040XP0	101.6	139.7	19.05	115.7	125.6	23830	20730	59560	30360	0.875	KXF040	KF040XP0	SF040XP0
KF042XP0	4.25	5.75	0.75	4.805	5.195	25070	21310	62720	31430	0.93	KXF042	KF042XP0	SF042XP0
KF042XP0	107.95	146.05	19.05	122	132	25070	21310	62720	31430	0.93	KXF042	KF042XP0	SF042XP0
KF045XP0	4.5	6	0.75	5.055	5.445	26360	21880	65830	32450	0.975	KXF045	KF045XP0	SF045XP0
KF045XP0	114.3	152.4	19.05	128.4	138.3	26360	21880	65830	32450	0.975	KXF045	KF045XP0	SF045XP0
KF047XP0	4.75	6.25	0.75	5.305	5.695	27600	22440	68990	33470	1.04	KXF047	KF047XP0	SF047XP0
KF047XP0	120.65	158.75	19.05	134.7	144.7	27600	22440	68990	33470	1.04	KXF047	KF047XP0	SF047XP0
KF050XP0	5	6.5	0.75	5.555	5.945	28850	22990	72100	34490	1.09	KXF050	KF050XP0	SF050XP0
KF050XP0	127	165.1	19.05	141.1	151	28850	22990	72100	34490	1.09	KXF050	KF050XP0	SF050XP0
KF055XP0	5.5	7	0.75	6.055	6.445	31340	24070	78370	36450	1.18	KXF055	KF055XP0	SF055XP0
KF055XP0	139.7	177.8	19.05	153.8	163.7	31340	24070	78370	36450	1.18	KXF055	KF055XP0	SF055XP0
KF060XP0	6	7.5	0.75	6.555	6.945	33870	25120	84680	38360	1.24	KXF060	KF060XP0	SF060XP0
KF060XP0	152.4	190.5	19.05	166.5	176.4	33870	25120	84680	38360	1.24	KXF060	KF060XP0	SF060XP0
KF065XP0	6.5	8	0.75	7.055	7.445	36360	26130	909050	40230	1.35	KXF065	KF065XP0	SF065XP0
KF065XP0	165.1	203.2	19.05	179.2	189.1	36360	26130	909050	40230	1.35	KXF065	KF065XP0	SF065XP0
KF070XP0	7	8.5	0.75	7.555	7.945	38890	27130	97210	42050	1.45	KXF070	KF070XP0	SF070XP0
KF070XP0	177.8	215.9	19.05	191.9	201.8	38890	27130	97210	42050	1.45	KXF070	KF070XP0	SF070XP0
KF075XP0	7.5	9	0.75	8.055	8.445	41380	28100	103480	43870	1.56	KXF075	KF075XP0	SF075XP0
KF075XP0	190.5	228.6	19.05	204.6	214.5	41380	28100	103480	43870	1.56	KXF075	KF075XP0	SF075XP0
KF080XP0	8	9.5	0.75	8.555	8.945	43920	29050	109750	456010	1.66	KXF080	KF080XP0	SF080XP0
KF080XP0	203.2	241.3	19.05	217.3	227.2	43920	29050	109750	456010	1.66	KXF080	KF080XP0	SF080XP0
KF090XP0	9	10.5	0.75	9.555	9.945	48900	30880	122280	49030	1.81	KXF090	KF090XP0	SF090XP0
KF090XP0	228.6	266.7	19.05	242.7	252.6	48900	30880	122280	49030	1.81	KXF090	KF090XP0	SF090XP0
KF100XP0	10	11.5	0.75	10.555	10.945	53920	32630	134820	52320	2.02	KXF100	KF100XP0	SF100XP0
KF100XP0	254	292.1	19.05	268.1	278	53920	32630	134820	52320	2.02	KXF100	KF100XP0	SF100XP0
KF110XP0	11	12.5	0.75	11.555	11.945	58940	34320	147350	55520	2.18	KXF110	KF110XP0	SF110XP0
KF110XP0	279.4	317.5	19.05	293.5	303.4	58940	34320	147350	55520	2.18	KXF110	KF110XP0	SF110XP0
KF120XP0	12	13.5	0.75	12.555	12.945	64960	35930	159890	58630	2.38	KXF120	KF120XP0	SF120XP0
KF120XP0	304.8	342.9	19.05	318.9	328.8	64960	35930	159890	58630	2.38	KXF120	KF120XP0	SF120XP0
KF140XP0	14	15.5	0.75	14.555	14.945	74010	39000	185000	64590	2.72	KXF140	KF140XP0	SF140XP0
KF140XP0	355.6	393.7	19.05	369.7	379.6	74010	39000	185000	64590	2.72	KXF140	KF140XP0	SF140XP0
KF160XP0	16	17.5	0.75	16.555	16.945	84010	41880	210070	70320	3.22	KXF160	KF160XP0	SF160XP0
KF160XP0	406.4	444.5	19.05	420.5	430.4	84010	41880	210070	70320	3.22	KXF160	KF160XP0	SF160XP0
KF180XP0	18	19.5	0.75	18.555	18.945	94060	44570	235140	75830	3.58	KXF180	KF180XP0	SF180XP0
KF180XP0	457.2	495.3	19.05	471.3	481.2	94060	44570	235140	75830	3.58	KXF180	KF180XP0	SF180XP0
KF200XP0	20	21.5	0.75	20.555	20.945	104100	47120	260260	81120	4.04	KXF200	KF200XP0	SF200XP0
KF200XP0	508	546.1	19.05	522.1	532	104100	47120	260260	81120	4.04	KXF200	KF200XP0	SF200XP0
KF250XP0	25	26.5	0.75	25.555	25.945	129180	52930	322950	93660	4.95	KXF250	KF250XP0	SF250XP0
KF250XP0	635	673.1	19.05	649.097	659.003	129180	52930	322950	93660	4.95	KXF250	KF250XP0	SF250XP0
KF300XP0	30	31.5	0.75	30.555	30.945	154250	58070	385670	105440	5.9	KXF300	KF300XP0	SF300XP0
KF300XP0	762	800.1	19.05	776.097	786.003	154250	58070	385670	105440	5.9	KXF300	KF300XP0	SF300XP0
KF350XP0	35	36.5	0.75	35.555	35.945	179360	62670	448520	116550	6.85	KXF350	KF350XP0	SF350XP0
KF350XP0	889	927.1	19.05	903.097	913.003	179360	62670	448520	116550	6.85	KXF350	KF350XP0	SF350XP0
KF400XP0	40	41.5	0.75	40.555	40.945	204430	66830	511200	127220	7.81	KXF400	KF400XP0	SF400XP0
KF400XP0	1016	1054.1	19.05	1030.097	1040.003	204430	66830	511200	127220	7.81	KXF400	KF400XP0	SF400XP0
KG040XP0	4	6	1	4.742	5.258	36490	35470	91210	50050	1.65	KXG040	KG040XP0	SG040XP0
KG040XP0	101.6	152.4	25.4	120.4	133.6	36490	35470	91210	50050	1.65	KXG040	KG040XP0	SG040XP0
KG042XP0	4.25	6.25	1	4.992	5.508	36490	35190	91210	50050	1.73	KXG042	KG042XP0	SG042XP0
KG042XP0	107.95	158.75	25.4	126.8	139.9	36490	35190	91210	50050	1.73	KXG042	KG042XP0	SG042XP0
KG045XP0	4.5	6.5	1	5.242	5.758	38940	36470	97300	52230	1.82	KXG045	KG045XP0	SG045XP0
KG045XP0	114.3	165.1	25.4	133.1	146.3	38940	36470	97300	52230	1.82	KXG045	KG045XP0	SG045XP0
KG047XP0	4.75	6.75	1	5.492	6.008	41340	37720	103390	54360	1.86	KXG047	KG047XP0	SG047XP0
KG047XP0	120.65	171.45	25.4	139.5	152.6	41340	37720	103390	54360	1.86	KXG047	KG047XP0	SG047XP0
KG050XP0	5	7	1	5.742	6.258	43780	38950	109440	56500	1.96	KXG050	KG050XP0	SG050XP0
KG050XP0	127	177.8	25.4	145.8	159	43780	38950	109440	56500	1.96	KXG050	KG050XP0	SG050XP0
KG055XP0	5.5	7.5	1	6.242	6.758	46230	39910	115530	58590	2.14	KXG055	KG055XP0	SG055XP0
KG055XP0	139.7	190.5	25.4	158.5	171.7	46230	39910	115530	58590	2.14	KXG055	KG055XP0	SG055XP0
KG060XP0	6	8	1	6.742	7.258	51070	42240	127710	62630	2.32	KXG060	KG060XP0	SG060XP0
KG060XP0	152.4	203.2	25.4	171.2	184.4	51070	42240	127710	62630	2.32	KXG060	KG060XP0	SG060XP0
KG065XP0	6.5	8.5	1	7.242	7.758	53520	43170	133800	64590	2.45	KXG065	KG065XP0	SG065XP0
KG065XP0	165.1	215.9	25.4	183.9	197.1	53520	43170	133800	64590	2.45	KXG065	KG065XP0	SG065XP0
KG070XP0	7	9	1	7.742	8.258	58360	45370	145930	68450	2.64	KXG070	KG070XP0	SG070XP0
KG070XP1	177.8	228.6	25.4	196.6	209.8	58360	45370	145930	68450	2.64	KXG071	KG070XP1	SG070XP1
KG075XP0	7.5	9.5	1	8.242	8.758	60810	46270	152020	70320	2.77	KXG075	KG075XP0	SG075XP0
KG075XP0	190.5	241.3	25.4	209.3	222.5	60810	46270	152020	70320	2.77	KXG075	KG075XP0	SG075XP0
KG080XP0	8	10	1	8.742	9.258	65650	48370	164200	74010	2.95	KXG080	KG080XP0	SG080XP0
KG080XP0	203.2	254	25.4	222	235.2	65650	48370	164200	74010	2.95	KXG080	KG080XP0	SG080XP0
KG090XP0	9	11	1	9.742	10.258	72990	51230	182420	79430	3.27	KXG090	KG090XP0	SG090XP0
KG090XP0	228.6	279.4	25.4	247.4	260.6	72990	51230	182420	79430	3.27	KXG090	KG090XP0	SG090XP0
KG100XP0	10	12	1	10.742	11.258	80230	53990	200650	84630	3.59	KXG100	KG100XP0	SG100XP0
KG100XP0	254	304.8	25.4	272.8	286	80230	53990	200650	84630	3.59	KXG100	KG100XP0	SG100XP0
KG110XP0	11	13	1	11.742	12.258	87570	56620	218920	89700	3.91	KXG110	KG110XP0	SG110XP0
KG110XP0	279.4	330.2	25.4	298.2	311.4	87570	56620	218920	89700	3.91	KXG110	KG110XP0	SG110XP0
KG120XP0	12	14	1	12.742	13.258	94860	59180	237140	94590	4.22	KXG120	KG120XP0	SG120XP0
KG120XP0	304.8	355.6	25.4	323.6	336.8	94860	59180	237140	94590	4.22	KXG120	KG120XP0	SG120XP0
KG140XP0	14	16	1	14.742	15.258	109440	64030	273630	104060	4.9	KXG140	KG140XP0	SG140XP0
KG140XP0	355.6	406.4	25.4	374.4	387.6	109440	64030	273630	104060	4.9	KXG140	KG140XP0	SG140XP0
KG160XP0	16	18	1	16.742	17.258	124060	68560	310130	113130	5.58	KXG160	KG160XP0	SG160XP0
KG160XP0	406.4	457.2	25.4	425.2	438.4	124060	68560	310130	113130	5.58	KXG160	KG160XP0	SG160XP0
KG180XP0	18	20	1	18.742	19.258	138640	72840	346620	121840	6.22	KXG180	KG180XP0	SG180XP0
KG180XP0	457.2	508	25.4	476	489.2	138640	72840	346620	121840	6.22	KXG180	KG180XP0	SG180XP0
KG200XP0	20	22	1	20.742	21.258	153220	76870	383070	130240	7.17	KXG200	KG200XP0	SG200XP0
KG200XP0	508	558.8	25.4	526.8	540	153220	76870	383070	130240	7.17	KXG200	KG200XP0	SG200XP0
KG220XP0	22	24	1	22.742	23.258	167850	80690	419590	138380	7.85	KXG220	KG220XP0	SG220XP0
KG220XP0	558.8	609.6	25.4	577.6468	590.7532	167850	80690	419590	138380	7.85	KXG220	KG220XP0	SG220XP0
KG250XP0	25	27	1	25.742	26.258	189720	86060	474310	150160	8.85	KXG250	KG250XP0	SG250XP0
KG250XP0	635	685.8	25.4	653.8468	666.9532	189720	86060	474310	150160	8.85	KXG250	KG250XP0	SG250XP0
KG300XP0	30	32	1	30.742	31.258	226220	94240	565440	168830	10.58	KXG300	KG300XP0	SG300XP0
KG300XP0	762	812.8	25.4	780.8468	793.9532	226220	94240	565440	168830	10.58	KXG300	KG300XP0	SG300XP0
KG350XP0	35	37	1	35.742	36.258	262710	101550	656560	186560	12.3	KXG350	KG350XP0	SG350XP0
KG350XP0	889	939.8	25.4	907.8468	920.9532	262710	101550	656560	186560	12.3	KXG350	KG350XP0	SG350XP0
KG400XP0	40	42	1	40.742	41.258	299210	108160	748140	203460	13.98	KXG400	KG400XP0	SG400XP0
KG400XP0	1016	1066.8	25.4	1034.8468	1047.9532	299210	108160	748140	203460	13.98	KXG400	KG400XP0	SG400XP0

Other types of Thin Section Ball bearing

Maintenance and Lubrication

Regular maintenance, including proper lubrication and periodic inspection for wear and tear, is crucial to ensuring the continued optimal performance and longevity of Type X bearings. Adhering to manufacturer guidelines is key to maximizing their operational life.

Conclusion

Open Type Thin Section Four Point Contact Ball Bearings (Type X) offer a unique solution for applications requiring the handling of both axial and radial loads simultaneously. Their four-point contact design, space-saving profile, and precision performance make them valuable components in industries such as robotics, machine tools, and medical devices. The versatility and load-carrying capacity of Type X bearings contribute to their widespread use in scenarios where both precision and versatility are paramount.

About LKPB Bearing Company

Luoyang LIKE Precision Machinery Co., Ltd – LKPB®, Located in Luoyang, China, Established in 2013 with a registered capital of 5 million, We are a professional bearing manufacturer.

LKPB strictly follows the ISO9001 quality system requirements for product quality control, we have a strong technical team to accept processing of non-standard precision bearings of P5, P4, P2 and VSP level of accuracy. The products inner diameter size range is φ20mm-φ2000mm.

We have established long term co-operation with a number of the world’s leading machine tool and robotics companies, the products can completely replace of INA/IKO/THK/FAG/SKF/KAYDON and other brands. We believe that cooperating with us will exceed your expectations.

Rotary Table Bearings ( YRT, YRTC, YRTS, YRTM, ZKLDF Series) ;

Cross Roller Bearings ( RA/RA-C, RAU, RB, RU, RW, RE, SX, XU, XV, XSU, XR/JXR, CRB/CRBC, CRBF/CRBFV, CRBH/CRBHV, CRBS/CRBSV, CRBT/CRBTF Series);

Thin Section Ball Bearings ( KAA, KA, KB, KC, KD, KF, KG, JHA, JA, JB, JG, JU Series);

Robot Reducer Bearings (CSF/CSG, SHF/SHG, CSD Series, RV Reducer Bearings and Flexible Bearings F, 3E Series);

Angular Contact Ball Bearings ( 718, 719, 70, 72, 2344/2347 Series);

Ball Screw Support Bearings ( ZKLF/ZKLN, ZARF/ZARN Series);

Slewing Ring ( Cross Roller, Four-Point Contact, Eight-Point Contact Same Path, Eight-Point Contact Different Path, Three-row roller and Flanged Series);

Hollow Rotary Platform Bearings ( ZK Series).

For expert guidance in meeting your specific requirements, reach out to our knowledgeable team. Experience firsthand how our precision solutions can elevate your machinery’s efficiency and durability. Contact us today!

LKPB With more than 10 years of production experience

Supporting OEM service; 50 days return service; 7*24 hours technical support; Accept non-standard customization; Maximum 24 months product warranty

Please let us know the model and quantity of the product you need and we will get back to you as soon as possible!

Open Type Thin Section Four Point Contact Ball Bearings (Type X)

Introduction

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Are Classified As Follows

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Key Features

1. Four Point Contact Design:

2. Axial and Radial Load Capacity:

3. Space-Saving Design:

4. Precision Performance:

5. Versatility in Applications:

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Applications

1. Robotics:

2. Material Handling Equipment:

3. Medical Devices:

4. Material Handling Equipment:

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Product Model

Other types of Thin Section Ball bearing

Maintenance and Lubrication

Conclusion

About LKPB Bearing Company

LKPB With more than 10 years of production experience

Please let us know the model and quantity of the product you need and we will get back to you as soon as possible!

Please let us know the model and quantity of the product you need and we will get back to you as soon as possible!

Please let us know the model and quantity of the product you need and we will get back to you as soon as possible!

Open Type Thin Section Four Point Contact Ball Bearings (Type X)

Introduction

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Are Classified As Follows

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Key Features

1. Four Point Contact Design:

2. Axial and Radial Load Capacity:

3. Space-Saving Design:

4. Precision Performance:

5. Versatility in Applications:

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Applications

1. Robotics:

2. Material Handling Equipment:

3. Medical Devices:

4. Material Handling Equipment:

Open Type Thin Section Four Point Contact Ball Bearings (Type X) Product Model

Other types of Thin Section Ball bearing

Maintenance and Lubrication

Conclusion

About LKPB Bearing Company

LKPB With more than 10 years of production experience

Please let us know the model and quantity of the product you need and we will get back to you as soon as possible!

Please let us know the model and quantity of the product you need and we will get back to you as soon as possible!

We respect your choice of cookies. We use cookies to improve your experience on our website. By browsing this site, you consent to our use of cookies.

LKPB®