LKPB 뉴스

THK/IKO/HIWIN 베어링 번호 의미

베어링 번호 의미

Introduction to Bearing Numbering Systems

In the world of bearings, each manufacturer has its own unique numbering system to identify and categorize their products. These numbering systems are designed to convey essential information about the bearing’s type, size, and specific features. Understanding the meaning behind these bearing numbers is crucial for ensuring proper selection, installation, and maintenance of bearings in various applications. In this article, we will explore the bearing number meanings used by three renowned manufacturers: THK, IKO, and HIWIN.

THK Bearing Number Meaning

THK is a leading Japanese manufacturer of linear motion guides, ball screws, and industrial bearings. Their bearing numbering system follows a specific pattern that provides insights into the bearing’s characteristics.

THK’s bearing numbers typically consist of four to six alphanumeric characters, with each component carrying a distinct meaning:

  1. Bearing Type: The first character or two characters represent the bearing type, such as “B” for ball bearings or “RB” for roller bearings.
  2. Bearing Series: The second character or set of characters indicates the bearing series, often related to the bearing’s internal design or intended application.
  3. Bore Diameter: The next set of numbers represents the bore diameter of the bearing, typically measured in millimeters.
  4. Additional Features or Variants: Additional characters or numbers may be included to denote specific features, materials, or variants of the bearing.

For example, a bearing number “RB20030” from THK Cross roller bearing, Inner diameter 200mm, height 30mm.

THK Bearing Number Meaning

IKO Bearing Number Meaning

IKO is a renowned Japanese manufacturer of bearings, linear motion products, and positioning systems. Their bearing numbering system follows a similar pattern to THK but may include additional characters for specific variants.

IKO’s bearing numbers typically consist of five to seven alphanumeric characters:

  1. Bearing Type: The first character or two characters represent the bearing type, such as “N” for needle roller bearings or “CR” for cross-roller bearings.
  2. Bearing Series: The second character or set of characters indicates the bearing series, often related to the bearing’s internal design or intended application.
  3. Bore Diameter: The next set of numbers represents the bore diameter of the bearing, typically measured in millimeters.
  4. Additional Features or Variants: Additional characters or numbers may be included to denote specific features, materials, or variants of the bearing, such as sealing options or special clearances.

For example, a bearing number “CRBF5515AT” from IKO cross roller bearings, Inner diameter 55mm, height 15mm.

IKO Bearing Number Meaning

HIWIN Bearing Number Meaning

HIWIN is a leading Taiwanese manufacturer of linear motion guides, ballscrews, and industrial bearings. Their bearing numbering system follows a similar pattern to THK and IKO but may include additional characters to denote specific features.

HIWIN’s bearing numbers typically consist of six to eight alphanumeric characters:

  1. Bearing Type: The first character or two characters represent the bearing type, such as “LM” for linear motion bearings or “RG” for cross-roller ring bearings.
  2. Bearing Series: The second character or set of characters indicates the bearing series, often related to the bearing’s internal design or intended application.
  3. Bore Diameter or Width: The next set of numbers represents either the bore diameter for rotary bearings or the width for linear bearings, typically measured in millimeters.
  4. Additional Features or Variants: Additional characters or numbers may be included to denote specific features, materials, or variants of the bearing, such as sealing options, preload levels, or special coatings.

For example, a bearing number “CRBD08022A” from HIWIN bearing, Inner diameter 80mm, height 22mm.

HIWIN Bearing Number Meaning

Importance of Understanding Bearing Number Meanings

Understanding the meaning behind bearing numbers is crucial for several reasons:

  1. Proper Selection: Accurate interpretation of bearing numbers ensures that you select the right bearing for your specific application, taking into account factors such as load capacity, speed rating, and environmental conditions.
  2. Maintenance and Replacement: Correct identification of bearing numbers facilitates proper maintenance and replacement procedures, ensuring compatibility and preventing potential failures.
  3. Technical Documentation: Bearing number meanings are often referenced in technical manuals, catalogs, and engineering drawings, making it essential to understand their significance for effective communication and collaboration within the industry.
  4. Inventory Management: Proper understanding of bearing number meanings aids in efficient inventory management, allowing for accurate tracking and ordering of replacement bearings as needed.

By familiarizing yourself with the bearing number meanings used by manufacturers like THK, IKO, and HIWIN, you can make informed decisions, streamline processes, and ensure the optimal performance and longevity of your bearing applications.

결론

In the world of industrial bearings, understanding the meaning behind bearing numbers is a crucial aspect of proper selection, installation, and maintenance. Manufacturers like THK, IKO, and HIWIN have established their unique numbering systems to convey essential information about their bearings’ types, sizes, and specific features. By decoding these bearing numbers, professionals in various industries can ensure accurate identification, compatibility, and optimal performance of their bearing applications. Whether you are an engineer, technician, or end-user, mastering the bearing number meanings will undoubtedly enhance your ability to navigate the complex world of industrial bearings and make informed decisions for your projects.

Manufacturer of precision bearings that are perfect replacements for THK/IKO/HIWIN

LKPB 공장 촬영

루오양 라이크 정밀 기계 유한 공사 - LKPB®, 중국 뤄양에 위치하고 있으며 2013 년에 등록 자본금 5 백만 달러로 설립되었으며, 우리는 전문가입니다. 베어링 제조업체.

LKPB는 제품 품질 관리에 대한 ISO9001 품질 시스템 요구 사항을 엄격하게 준수하며 P5, P4, P2 및 VSP 수준의 비표준 정밀 베어링 가공을 수용 할 수있는 강력한 기술 팀을 보유하고 있습니다. 제품 내경 크기 범위는 φ20mm-φ2000mm입니다.

우리는 세계 유수의 공작 기계 및 로봇 회사들과 장기적인 협력 관계를 구축했으며, 제품은 INA/IKO/THK/FAG/SKF/KAYDON 및 기타 브랜드를 완전히 대체 할 수 있습니다. 당사와의 협력은 귀하의 기대를 뛰어넘을 것이라고 믿습니다.

  1. 회전 테이블 베어링 (YRT, YRTC, YRTS, YRTM, ZKLDF 시리즈) ;
  1. 크로스 롤러 베어링 (RA/RA-C, RAU, RB, RU, RW, RE, SX, XU, XV, XSU, XR/JXR, CRB/CRBC, CRBF/CRBFV, CRBH/CRBHV, CRBS/CRBSV, CRBT/CRBTF 시리즈);
  1. 얇은 섹션 베어링 (KAA, KA, KB, KC, KD, KF, KG, JHA, JA, JB, JG, JU 시리즈);  
  1. 로봇 감속기 베어링 (CSF/CSG, SHF/SHG, CSD 시리즈, RV 감속기 베어링 및 플렉시블 베어링 F, 3E 시리즈);
  1. 앵귤러 콘택트 볼 베어링 (718, 719, 70, 72, 2344/2347 시리즈);  
  1. 볼 스크류 지지 베어링 (ZKLF/ZKLN, ZARF/ZARN 시리즈);
  1. 스윙 링 (크로스 롤러, 4점 접점, 8점 접점 동일 경로, 8점 접점 다른 경로, 3열 롤러 및 플랜지 시리즈);
  1. 중공 로터리 플랫폼 베어링 (ZK 시리즈).
 

특정 요구 사항을 충족하는 데 대한 전문가의 안내를 받으려면 지식이 풍부한 당사 팀에 문의하세요. 당사의 정밀 솔루션이 어떻게 기계의 효율성과 내구성을 향상시킬 수 있는지 직접 경험해 보십시오. 오늘 저희에게 연락하십시오!

LKPB 10년 이상의 생산 경험 보유

OEM 서비스 지원; 50일 반품 서비스; 7*24시간 기술 지원; 비표준 사용자 정의를 허용합니다. 최대 24개월 제품 보증

답글 남기기